Specifications; General Specifications - Yamaha Raptor 90 YFM90RA 2011 Service Manual

EBS01001

GENERAL SPECIFICATIONS

Item
Model code
Dimensions
Overall length
Overall width
Overall height
Seat height
Wheelbase
Minimum ground clearance
Minimum turning radius
Basic weight
With oil and full fuel tank
Engine
Engine type
Cylinder arrangement
Displacement
Bore ×
stroke
Compression ratio
Standard compression pressure (at sea level) 1,250 kPa
Starting system
Lubrication system
Oil type or grade
Engine oil
0˚ 10˚ 30˚
50˚
YAMALUBE 4 (20W-50) or SAE 20W-50
YAMALUBE 4 (10W-40) or SAE 10W-40
SAE 5W-30
-20˚ -10˚ 0˚
10˚
Final transmission oil
Oil capacity
Engine oil
Periodic oil change
Total amount
Final transmission oil
Total amount
Air filter
GENERAL SPECIFICATIONS

SPECIFICATIONS

70˚ 90˚ 110˚ 130˚F
20˚ 30˚ 40˚ 50˚C
2 - 1
Standard
43D7
1,490 mm (58.7 in)
885 mm (34.8 in)
910 mm (35.8 in)
654 mm (25.7 in)
1,010 mm (39.8 in)
100 mm (3.9 in)
2,900 mm (114in)
120 kg (264 lb)
Air cooled 4-stroke, SOHC
Single cylinder
88.0 cm (5.37 cu.in) 3
47.0 × 51.0 mm (1.85 × 2.01 in)
10.2 : 1
(12.5 kg/cm 2 , 177.8 psi) at 1,000 r/min
Electric starter & kickstarter
Wet sump
YAMALUBE 4, SAE5W-30 or SAE10W-40
or SAE20W-50
SAE 80API "GL-4" Hypoid gear oil
0.75 L (0.66 Imp qt, 0.80 US qt)
0.80 L (0.70 Imp qt, 0.85 US qt)
0.30 L (0.27 Imp qt, 0.32 US qt)
Wet type element
SPEC
2