Front Arms And Front Shock Absorber Assemblies; Front Arms And Front Shock Absorber; Assemblies - Yamaha Raptor 90 YFM90RA 2011 Service Manual

FRONT ARMS AND FRONT SHOCK ABSORBER

EBS00460

FRONT ARMS AND FRONT SHOCK ABSORBER ASSEMBLIES

35 Nm (3.5 m • kg, 25.3 ft • Ib)
2
18 Nm (1.8 m • kg, 13.0 ft • Ib)
35 Nm (3.5 m • kg, 25.3 ft • Ib)
Order
Removing the tie-rods and steering
knuckles
Front brakes
1 Tie-rod
2 Front bumper
3 Lower front arm
4 Upper front arm
5 Front shock absorber
6 Steering knuckle
7 Bush
8 Spacer
9 Spacer
7
35 Nm (3.5 m • kg, 25.3 ft • Ib)
Job/Part
6 - 40

ASSEMBLIES

New
35 Nm (3.5 m • kg, 25.3 ft • Ib)
7
4
New
7
9
7
3
9
25 Nm (2.5 m • kg, 25.3 ft • Ib)
35 Nm (3.5 m • kg, 18.1 ft • Ib)
Q'ty Remarks
Remove the parts in the order listed.
The following procedure applies to both of
the tie-rods and steering knuckles.
Refer to "FRONT BRAKES".
1 Disconnect.
Refer to "REMOVING THE FRONT ARMS"
1
and "INSTALLING THE FRONT ARMS".
1
1
1
1
6
1
2
For installation, reverse the removal
procedure.
CHAS
7
1
8
5
New