LOCATION OF CONTROLS (cont'd)
AC adaptor jack
Battery
Compartment
MOUNTING THE PHONE ON THE WALL
Before doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the
•
mounting location that could cause a hazard when inserting
screws into the wall.
Mount your phone within distance of a working phone jack.
•
Make sure the wall material is capable of supporting the weight
•
of the base and handset.
Use screws with anchoring devices suitable for the wall material
•
where the base unit will be placed.
Be sure the wall is capable of supporting the weight of the
•
phone, and use the proper type of anchoring device for the wall
material.
Insert two #10 screws (minimum length of 35mm, not supplied)
•
into the wall, 100mm vertically apart.
Leave the screw heads 3mm away from the wall to allow room
•
for mounting the phone.
Align the mounting slots over the screws and slide the base
•
down into place.
To mount the telephone on a wall, first slot the Wall Mount Bracket
into the two Mounting Bracket Location Slots at the back of the base.
On the base front, slide the handset hook out of the slot. Rotate hook
180° and flip it from front to back. Slide it back into the slot. It should
extend slightly; this extension fits into a slot on the handset.
Telephone line jack
Mounting
Bracket
location slots
Ringer volume
switch
Ringer pitch
switch
7