Mounting The Base On A Wall - Uniden DECT1035 User Manual

• This equipment contains a rechargeable Nickel-Metal Hydride (Ni-MH) battery.
Rechargeable Nickel-Metal Hydride Battery warning
• Do not short-circuit the battery.
• The rechargeable Ni-MH batteries contained in this equipment may explode
if disposed of in a fire.
• Do not charge the battery used in this equipment in any charger other than
the one designed to charge this battery as specified in the owner's manual.
Using another charger may damage the battery or cause it to explode.
You can mount your base to any standard telephone wall plate using

Mounting the Base on a wall

the included wall mount bracket.
1. Route the AC adapter and the
telephone cord through the hole of
the wall mount bracket.
2. Connect the AC adapter and the
telephone cords.
3. Line up the four tabs on the wall
mount bracket (two at the top and
two at the bottom) with the four
notches on the bottom of the base.
Slide the bracket into place
4. Hook the AC adapter cord into the smaller
notch at the bottom of the bracket, and let
the cord hang below the bracket.
24
(Bottom of the base)
(To AC outlet)