Test with control solution
OneTouch® Verio® Control Solution is used to check that
the meter and test strips are working together properly
and that the test is performing correctly. (Control solution
is available separately.)
NOTE:
• Use only OneTouch® Verio® Control Solution with your
OneTouch® Verio® Meter.
• When you first open a new vial of control solution,
record the discard date on the vial label. Refer to the
control solution insert or vial label for instructions on
determining the discard date.
• Tightly close the cap on the control solution vial
immediately after use to avoid contamination or
damage.
Take a test
2
59