5.3. Removing the Pool Cleaner from the pool ......5 5.4. Maintenance ................6 5.5. Off-season storage ..............7 6. POWER SUPPLY ................... 8 7. REMOTE CONTROL UNIT ..............9 CADDY ASSEMBLY ................. 61 Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 1 29/12/2013 9:59 AM...
When not in use store the Pool Cleaner on the Caddy in a shaded area. Use the Pool Cleaner in the following water conditions only: Chlorine Max 4 ppm 7.0 - 7.8 Temperature 6-34°C 43-93°F NaCl Maximum = 5000 ppm Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 2 29/12/2013 9:59 AM...
Bottom lid and filter Bag Remote Control Unit Filter bag options: Power Supply Fine - factory default Unit Ultra fine - extra Disposable filter bag x 5 Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 3 29/12/2013 9:59 AM...
B. Move the handle to the desired Fast speed – for faster position and release the latch but less efficient cleaning to hold the handle in place. action on water-line. Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 4 29/12/2013 9:59 AM...
5.3. Removing the Pool Cleaner from the pool The robot will perform automatic shut-off at the end of the cleaning cycle. Turn OFF and unplug the power supply. CAUTION Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 5 29/12/2013 9:59 AM...
Clean the filter bag with a hose. Periodically clean the brushes with a hose. It is recommended to periodically wash the filter bag in a washing machine. Use gentle cycle program. Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 6 29/12/2013 9:59 AM...
Caddy • Store the pool cleaner upright on the Caddy in a protected area out of direct sun/rain/frost at a temperature of between 5˚-45˚C / 41˚-113˚F Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 7 29/12/2013 10:00 AM...
Delay indicator The power supply is equipped with a Delay indicator that indicates if the Delay option is activated (through the remote control unit). Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 8 29/12/2013 10:00 AM...
1. To change the parameters press the up or down arrows. 2. To select the parameter settings use the right or left arrows. When you reach the required function press the Set/OK button. Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 9 29/12/2013 10:00 AM...
Page 10
• When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return to default settings. Dolphin WAVE 100 Pool Cleaner | Operating Instructions 8151637_Book.indb 10 29/12/2013 10:00 AM...