5.2. Putting the Pool Cleaner into the pool .......5 5.3. Removing the Pool Cleaner from the pool ......5 5.4. Maintenance ................6 5.5. Off-season storage ...............7 6. POWER SUPPLY ................8 7. REMOTE CONTROL UNIT ............9 Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
When not in use store the Pool Cleaner on the Caddy in a shaded area. Use the Pool Cleaner in the following water conditions only: Chlorine Max 4 ppm 7.0 - 7.8 Temperature 6 – 34°C (43-93°F) NaCl Maximum = 5000 ppm Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
(Optional) Wonder (foam) brushes For smooth ceramic Bottom lid and filter bags Remote control unit Filter bags options: Power supply unit Fine - default Ultra fine - extra Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
1 - 2 Normal advance More efficient cleaning action on water- line. 3 - 4 Fast advance Fast speed – for faster but less efficient cleaning action on water-line. Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
5.3. Removing the Pool Cleaner from the pool The robot will perform automatic shut-off at the end of the cleaning cycle. Turn OFF and unplug the power supply. CAUTION Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
5.4. Maintenance Clean the filter bags with a hose. Periodically clean the brushes with a hose. It is recommended to periodically wash the filter bags in a washing machine. Use gentle cycle program. Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
• Roll up the cable so that it has no kinks and place on the Caddy • Store the pool cleaner in a protected area either on its Caddy or simply upsidedown Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
If the LED does not turn off after the filter bag had been emptied and cleaned, press the RESET button while the robot is working. Delay indicator The power supply is equipped with a Delay indicator that indicates if the Delay option is activated (through the remote control unit). Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
1. To change the parameters press the up or down arrows. 2. To select the parameter settings use the right or left arrows. When you reach the required function press the Set/OK button. Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...
Page 12
• After 2 minute if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner will continue to work in the previous settings. • When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return to default settings. Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions...