Installing The Adjustable Slicing Disc; Adjusting The Slicing Thickness; Installing The Reversible Shredding Disc - KitchenAid KFP1466 Instructions Manual

ASSEMBLING THE FOOD PROCESSOR

Installing the adjustable slicing disc

Hold the slicing disc by the finger grips
1
and lower it onto the drive adapter.
TIP: You may need to turn the disc/adapter until it drops down into place.

Adjusting the slicing thickness

Thinner_
Set the desired thickness by moving the lever
to the left for thinner slices and to the right
for thicker slices.
Installing the r_ever_sible shr_edding disc
Hold the reversible shredding disc
1
by the 2 finger grips with the desired
shredding side facing UP . Insert the
disc adapter into the hole in the
bottom of the disc.
TIP: You may need to turn the disc/adapter until it drops down into place.
2
NOTE: The lever only works with
the externally adjustable slicing disc.
Changing thickness settings with other
discs or blades installed will have no
Thicker_
effect on operation.
Finger_ gr_ip
2
Install the work bowl cover, being sure
it locks into place.
With the work bowl installed, slide the
drive adapter onto the power shaft.
Dr_ive
adapter_
11