Configuring Snmp - EnGenius X-TRA RANGE ENS200 User Manual

B N S
ASIC ETWORK ETTINGS

4.5.3 Configuring SNMP

SNMP is used in network management systems to monitor network-attached devices for conditions that warrant administrative atten-
tion.
SNMP Enable or disable the ENS200 SNMP function.
Contact Enter the contact details of the device.
Location Enter the location of the device.
Community Name (read only)
accessing the SNMP community for read-only access.
Community Name (read/write)
accessing the SNMP community for read and write access.
Trap Destination Address
traps are to be sent.
Trap Destination Community Name
the SNMP trap community.
Enter the password for
Enter the password for
Enter the IP address where SNMP
Enter the password of
4-46
C SNMP
ONFIGURING