Client Bridge Mode - EnGenius X-TRA RANGE ENS200 User Manual

B N S
ASIC ETWORK ETTINGS

Client Bridge Mode

Client Bridge Mode lets you connect two LAN segments via a wireless link as though they are on the same physical network. Since
the computers are on the same subnet, broadcasts reach all machines. As a result, DHCP information generated by the server reach
all client computers as though the clients residing on one physical network.
Wireless Mode Wireless mode supports 802.11b/g/n mixed
modes.
SSID Specify the SSID if known. This field is completed
automatically if you select an Access Point in the Site Survey.
Site Survey Scans nearby locations for Access Points. You
can select a discovered Access Point to establish a connection.
Prefer BSSID Enter the MAC address if known. If you select an
Access Point in the Site Survey, this field is completed
automatically.
Wireless Security See section 8.2 for information.
Click Accept to confirm the changes or Cancel to cancel and return previous settings.
Profile If you used the Site Survey, the Web Configurator
shows nearby Access Points. To connect to an Access Point,
click the Access Point's BSSID.
Wireless Security See Configuring Wireless Security.
Click Refresh to scan again.
4-26
C B M
LIENT RIDGE ODE