Point-To-Point Protocol Over Ethernet (Pppoe) - EnGenius X-TRA RANGE ENS200 User Manual

B N S
ASIC ETWORK ETTINGS

Point-to-Point Protocol over Ethernet (PPPoE)

Point-to-Point Protocol over Ethernet (PPPoE) is used mainly by ISPs that provide DSL modems to connect to the Internet.
MTU Enter the maximum transmission unit (MTU). The MTU
specifies the largest packet size permitted for an internet
transmission (PPPoE default: 1492). The MTU size can be set
between 512 and 1492.
Login Enter the username assigned by an ISP.
Password Enter the password assigned by an ISP.
Service Name Enter the service name of an ISP (optional).
Connect on Demand Select the radio button to specify the
maximum idle time. Internet connection will disconnect when it
reach the maximum idle time, but it will automatically connect
when user tries to access the network.
Keep Alive Select whether to keep the Internet connection
always on, or enter a redial period once the internet lose
connection.
P
OINT
4-14
- -P P E
TO OINT ROTOCOL OVER THERNET
(PPP E)
O