Under Tow; Fuse - Evinrude E-TEC 40RL 2008 Operator's Manual

Table of Contents

Advertisement

Using Your E-TEC Outboard

UNDER TOW

Should you require a tow from another boat:
• Shift your engine to NEUTRAL;
• Tilt its gearcase out of the water;
• Off-load all persons into another boat; and
• Keep speed slower than planing speed.

FUSE

On outboards equipped with an accesso-
ry electric starter, a blown fuse will not allow
the engine to start. Replace it with a fuse of
the same rating. A spare fuse is provided.
Repeated fuse failures indicate a potentially
serious problem. Do not replace it with higher
rated fuse; see your Dealer for service.
Fuse Replacement
IMPORTANT: Use only fuses of the same rat-
ing. Your Evinrude E-TEC outboard uses 10-
amp fuses.
26
Remove engine cover. Install spare fuse in
place of failed fuse.
2
1. Fuse
2. Spare fuse
IMPORTANT: Failure to install cover securely
may cause electrical problems.
1

Advertisement

Table of Contents
loading

Table of Contents