Environmental Protection; Important Note Regarding Product Liability; Correction Of Malfunctions - WAGNER WallPerfect Flexio 867 Operating Instructions Manual

GB
WallPerfect I-Spray spray attachment incl. 1800 ml container
For processing interior wall paint
Further information about the WAGNER range of products for renovating is available
under www.wagner-group.com

24. Environmental protection

The device and all accessories and packaging have to be recycled in an
environmentally friendly manner. Do not dispose of the appliance with
household waste. Support environmental protection by taking the appliance
to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents may not be emptied into drains, the sewage system
or disposed of as household rubbish. It has to be disposed of separately as
special waste. Please pay special attention to the instructions on the product
packaging.

25. Important Note regarding Product Liability!

Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for
his product only if all parts originate from or were approved by the manufacturer
and the devices are assembled and operated correctly. The use of other accessories
and spare parts can partially or completely invalidate the liability.

26. Correction of Malfunctions

Malfunction
No coating
material emerges
from the nozzle
Coating material
drips from the
nozzle
36
Accessories (not included in the delivery)
Cause
•
Nozzle clogged
•
Material volume setting turned too
far to the left (-)
•
No pressure build-up in container
•
Container empty
•
Feed tube loose
•
Feed tube clogged
•
Ventilating bore (Fig.14, A) clogged
•
Coating material assembly at air
cap, nozzle or needle
•
Nozzle loose
•
Nozzle seal worn
•
Nozzle worn
Flexio 867
2326 477
Remedy
➞ Clean
➞ Turn to the right (+)
➞ Tighten container
➞ Refill
➞ Insert
➞ Clean
➞ Clean
➞ Clean
➞ Union nut tighten
➞ Change
➞ Change