Flexio 867 MANY THANKS FOR PLACING YOUR TRUST IN US We would like to congratulate you on purchasing this brand product from Wagner; we are sure that you will enjoy working with it greatly. Please read the Operating Manual carefully and observe the safety information before starting the device.
Flexio 867 27. Technical Data ..............18 2 years guarantee .
Page 11
Flexio 867 b) Never use the tool in hazardous areas that contain flammable liquids, gases or dusts. Power tools generate sparks that can ignite the dust or vapors. c) Keep children and other persons away when using the power tool. You can lose control of the tool if you are distracted.
Page 12
Flexio 867 d) Remove setting tools or wrenches before switching on the power tool. A tool or wrench that is in a rotating tool part can lead to injuries. e) Avoid an unnatural posture. Ensure that you are standing securely and have your balance at all times.
Flexio 867 5. Service a) Have your tool repaired only by qualified specialist personnel and only with original spare parts. This ensures that the tool safety is maintained. b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s service agent or a similarly qualified person in order to avoid a safety hazard.
1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air filter, slots for air intake covered. With original WAGNER accessories and spare parts, you have the guarantee that all safety regulations are fulfilled. 4. Description/ Scope of delivery Description/ Scope of delivery (Figs.
Flexio 867 5. Field of application Many different coating substances can be processed with the Flexio 867. A different spray attachment must be used, depending on the coating substance: Coating Materials Spray attachment Low-viscosity coating substances: Perfect Spray (anthracite) Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes, automotive finishes, staining sealers and wood sealer-preservatives.
Flexio 867 Pay attention to the quality of the adhesive tape used. Do not use excessively strong adhesive tape on wallpaper and painted surfaces, in order to avoid damaging these surfaces when removing the tape. Remove adhesive tape slowly and evenly; do not use jerky movements. Do not leave adhesive tape on surfaces any longer than necessary, in order to minimise the possibility of residues when removing.
Flexio 867 4. Remove the spray attachment from the deposition tray. Unscrew the container from the spray attachment. 5. Align the ascending tube. (Fig. 5) If the ascending tube is positioned correctly, the container contents can be sprayed without almost any residue. When working on lying objects: Turn the ascending tube forwards.
Flexio 867 12. Selecting the Spray Setting (WallPerfect I-Spray spray attachment) WARNING! Danger of injury! Never pull the trigger guard while adjusting the air cap. 2 different spray jet shapes can be set by turning the adjustment ring (fig. 10, 1) Fig.
Flexio 867 • The spray movement should come from the arm, not just from the wrist. This ensures that a uniform distance is maintained between the spray gun and the spray surface during the spray operation. Select a distance of 5 - 15 cm, depending on the desired spray jet width.
Flexio 867 7) Turn on the machine and spray the solvent or water into a container or a cloth. 8) Repeat the above procedure until the solvent or water emerging from the nozzle is clear. 9) Turn off the machine and divide the spray gun. Press the hook (Fig. 6 "click") slightly downwards.
Flexio 867 19. Cleaning the WallPerfect I-Spray spray attachment 1) Screw of the container and empty it. Pull out the suction tub with container seal. CAUTION! Never clean seals, diaphragm and nozzle or air holes of the spray gun with metal objects.
Flexio 867 20. Maintenance WARNING! Never operate the machine without the air filter; dirt could be sucked in and interfere with the function of the machine. Do not store any objects in the air filter compartment. Change the air filter if it is soiled. Unplug the power plug. Open the cover of the air filter compartment (Fig.
Flexio 867 Spare Parts List WallPerfect I-Spray spray attachment (Fig. 25) Suction tube 2328 922 Container seal 2328 919 Container with cover 1300 ml (only for WallPerfect spray 2305 155 attachment) Spare Parts List Flexio 867 (Fig. 26) Pos. Designation Order No.
WallPerfect I-Spray spray attachment incl. 1800 ml container For processing interior wall paint 2326 477 Further information about the WAGNER range of products for renovating is available under www.wagner-group.com 24. Environmental protection The device and all accessories and packaging have to be recycled in an environmentally friendly manner.
Page 25
Flexio 867 Malfunction Cause Remedy • Atomisation too Material volume too large ➞ Turn material volume coarse Material volume adjusting screw adjusting screw to the turned too far to the right (+) left (-) • Nozzle contaminated ➞ Clean • Viscosity of coating material too ➞...
Page 26
Flexio 867 27. Technical Data Technical Data Max. viscosity: Interior wall paint 4000 mPas Varnish paints, glazes, etc. 170 DIN-s Max. flow rate: Interior wall paint 400 ml/min Varnish paints, glazes, etc. 200 ml/min Power source 240 V, 50 Hz Power consumption 660 W Atomizing output:...
Page 27
Wearing parts are also excluded from the guarantee. The guarantee excludes commercial use. We expressly reserve the right to fulfil the guarantee. The guarantee expires if the tool is opened up by persons other than WAGNER service personnel. Transport damage, maintenance work and loss and damage due to faulty maintenance work are not covered by the guarantee.