Locking The Osd Menu - Fujitsu B19-7 LED Operating Manual

Select input signal (D-SUB/DVI-D)
► Press the INPUT
► Press the /
monitor connection (VGA or DVI).
► Press the MENU
This setting window can also be called when the OSD menu is locked.
Performing auto-adjustment of the monitor
This setting is only possible with an analog VGA input.
► Press the
AUTO

The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the
ECO
keep them pressed for a few seconds.

The message Power button locked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the

The message OSD locked and a progress bar appear.
► To activate the lock function, keep both buttons pressed until the progress bar is fully loaded.

The OSD menu is locked.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu
button to call the Input select setup window.
button or the
/ button to confirm or the
button for about 1 second.
button and the
INPUT
MENU button and the ON/OFF switch simultaneously for several seconds.
/ button to select the desired
AUTO /
button at the same time and
button to cancel.
Operation
23