Changing the monitor settings
When putting the monitor into operation for the ﬁrst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
1 = SELECT / MENU button
2 = Forwards / ECO button
3 = Back / INPUT button
Performing auto-adjustment of the monitor
► Press the
EXIT / AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting input signal (D-SUB/DVI-D/HDMI)
► Press the Back /
► Press the Forwards / ECO button or the Back /
desired monitor connection (VGA, DVI or HDMI).
This setting window can also be called up when the OSD menu is locked.
Downloaded from ManualMonitor.com Manuals
button for about 1 second.
button to call up the Input selectsetting window.
4 = EXIT / AUTO button
5 = Power indicator
6 = ON/OFF switch
button to select the
A26361-K1254-Z220-1-7619, edition 2