Table of Contents
Advertisement
Quick set-up guide
4
Where to put your
conferencing unit
• Place the base unit
within 6 metres of a mains
power socket so the cables
will reach.
• Make sure it's at least a
metre away from other
electrical appliances to avoid
interference.
• Don't place the wireless mics
or base unit in a bathroom or
other humid area.
• The product works by
sending radio signals
between the wireless mics
and base unit. The strength
of the signal depends on
where you position the
base unit.
1
Plug in cables
1. Plug the 6 metre connector cable into the base unit
and the other end into the connection box's socket
labelled To Base.
2. Plug one end of the phone line cord into the
connection box's socket labelled To Line and the
other end into the phone line wall socket.
3. Plug the end of the mains power adaptor into the
connection box and the other end into the wall
power socket and switch on.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
1
3
2
Advertisement
Table of Contents
