De-Register And Re-Register The Wireless Mics - BT X300 Quick Setup And User Manual

36 Settings
If you wish to stop the process
you can press the
If registration fails, you will see
the error message 'Registration
failed. Try again'. Please follow
the steps again.

De-register and re-register the wireless mics

button.
If you have purchased an additional wireless mic
you will need to de-register and then re-register all
the mics before you can use them.
1. When the conferencing unit is in idle mode, put all
replacement/working mics on the base unit.
2. Enter the code *331734# and press
base unit.
3. The display will show 'Please Place All Wireless
Mics On Cradle, Then Press OK'.
4. Wait for the base to go through the de-registration
and registration process.
5. Once the process has been successful, the display
will show 'Registration done' and you will hear
a confirmation tone.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
on the