INTRODUCTION ® The Dolphin II CE Remote is Balboa’s latest generation remote control. It is designed with sophisticated technology that will allow you to consolidate many of your existing remote controls along with the entertainment system in your spa. It’s packed with easy-to-use features such as:...
FEATURES AND FUNCTIONS Use the illustration below to locate the Dolphin ® Remote features and study the key locations (on these two pages) to learn how they function.
Page 5
Press POWER once to turn on or off the selected home entertainment component. The LED (red light) blinks to show that the remote control is working and is sending signals. Press TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD once to select a home entertainment component to control.
FEATURES AND FUNCTIONS …Continued Use GUIDE to display the program guide. Use EXIT to exit out of an on-screen menu and guide. Use the four directional keys to move the cursor in the program guide and menu screens. Use SELECT to choose options, PPV events, and to tune programs from the program guide.
BATTERIES Whenever batteries need to be replaced, the Dolphin will blink twice with every key press. Simply replace the batteries. The Dolphin retains your favorite settings. INSTALLING BATTERIES 1. On the back of the Dolphin Remote, remove the screws that hold the battery cover in place and lift off the battery cover.
PROGRAMMING TV CONTROL Locate the brand name of your TV in the Setup Codes For TVs section below, and write it in the following space. TV Brand: The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Dolphin to operate your TV: 1.
PROGRAMMING VCR CONTROL Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space. VCR Brand: The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Dolphin to operate your VCR: 1.
PROGRAMMING CD CONTROL Locate the brand name of your CD Player in the Setup Codes For CD Players section below, and write it in the following space. CD Player Brand: The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Dolphin to operate your CD Player: 1.
PROGRAMMING AUDIO CONTROL Using the Dolphin’s RCVR mode, you can also control an audio component, such as a stereo receiver or a stereo amplifier. Locate the brand name of your audio component in one of accompanying code lists. Write it in the appropriate space.
Aurora Systems TV 0801 Blaupunkt TV 0763 Casio TV 1205 CCD TV 0463 Clarion TV 0180 Fahrenheit TV 1598 JVC Monitor 0731 Signet TV 0844 Clarion VCR 0800 Clarion/Jenson VCR 0888 Samsung VCR 0889 Sony VCR 0240 Blaupunkt DVD 0717 Clarion DVD 0891, 0892, 1039 Fahrenheit DVD - 5...
CHECKING THE CODES If you have set up the Dolphin using the “Searching For Your Code” procedure, you may need to find out which four-digit code is operating For example, to find out which code is operating your TV: 1. Turn on your TV. 2.
REASSIGNING DEVICE KEYS The Dolphin can be set up to control a second TV or VCR, or any combination of four home entertainment components. For example, to have the Dolphin control a TV, a Cable Converter, and two VCRs, you will need to reassign the unused RCVR key to operate the second VCR as follows: 1.
SETTING VOLUME LOCK The Dolphin can be set so that the volume control buttons will always control the same device no matter which device mode is selected. If your TV is not remote controllable, or if you would like the volume to be controlled by a different component, you can change the Volume Lock setting to control volume through a non-associated mode (e.g., through the cable in...
To Change Volume Lock to the CD mode: 1. On the Dolphin, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 3 and then press CD once. The LED will blink twice. 3.
USING THE LEARNING FEATURE You can program the non-spa buttons to add devices (e.g., VCR Tracking Up or Down). NOTE: PLEASE HAVE YOUR ORIGINAL REMOTE CONTROLS ON HAND BEFORE PROGRAMMING THE LEARNING FEATURE. BE SURE TO PRESS EACH KEY WITHIN 10 SECONDS OF THE PREVIOUS ENTRY.
Deleting Functions From The Learning Keys: 1. Press and hold SETUP until the LED (red light) blinks twice, then release SETUP. 2. Enter 9 - 7 - 6. The LED will blink twice. 3. Press the device key once where the learned feature is stored (e.g., TV).
SPECIFICATIONS Remote Control Power 2 AA Batteries IR Command Center Power 120 VAC IR/Visual Equipment Range * Up to 30 Feet (7.62 m) ± 30° Remote Control Dimensions (H x W x D) 9-2⁄16 x 2-10⁄16 x 1-3⁄16 in. 232 x 65 x 31 mm Remote Control Weight (w/o Batteries) 8 oz (220 g) NOTE: Specifications are typical.