Using The Autofocus-Assist Light - Bolt VX-760N User Manual

Using the Autofocus-Assist Light

Camera autofocus systems can have difficulty locking onto a subject in dim light. When the ambient light level
is low, the VX-760N will emit a red autofocus-assist beam when you press your camera's shutter-release
button halfway in order to autofocus. The camera will then be able to autofocus by locking onto the projected
light.
Note: The autofocus-assist light is available only when your camera's autofocus system is set to AF-A or AF-S.
It is not available when AF-C is selected.
Bouncing Your Flash
The VX-760N flash head can tilt down to -7°, and up at 45°, 60°, 75°, and 90° angles to the lens. It can also
swivel horizontally 180° to the right and 90° to the left.
| |
30 30 Using the Autofocus-Assist Light