Using The Autofocus-Assist Light - Bolt VS-260C User Manual

To apply flash exposure compensation, press the flash exposure compensation button on your camera and
adjust the flash exposure level up or down with your camera's controls.
The flash exposure compensation range and controls vary between different camera models. Consult your
camera's manual for more information about this feature.

Using the Autofocus-Assist Light

Camera autofocus systems can have difficulty locking on a subject in dim light. When the ambient light level is
low, the VS-260C will emit a red autofocus-assist beam when you press your camera's shutter-release button
halfway to autofocus. The camera will then be able to autofocus by locking on the projected light.
Note that the autofocus-assist light is only available when your camera's autofocus system is set to center or
multi-point autofocus. It is not available when single autofocus points other than the center point are selected.
|
Using Flash Exposure Compensation 17