Mounting The Flash - Bolt VX-760N User Manual

To dismount the flash from your camera, make sure the
VX-760N is turned off and follow these steps:
1. Rotate the locking wheel counterclockwise to release the flash.
2. Slide the mounting foot out of your camera's hot shoe.
Mounting the VX-760N on the included stand:
You can mount the VX-760N on the included stand in the same way you would mount it on your camera. This
allows you to set the flash up on a flat surface, or to attach it to a tripod head, light stand, or clamp that has a
compatible 1/4"-20 screw mount.

Mounting the Flash

|
15