Bolt VX-760N User Manual page 39

A. In TTL mode, the master will wirelessly transmit all the TTL exposure data to the group.
B. Manual mode wirelessly transmits the master's manual power settings to the group.
C. Flash disabled mode disables the selected group. In this mode, no settings will appear on the
LCD when the group is selected, and the disabled groups will not appear on the LCD.
3A
Zoom
4. Use the left and right navigation buttons to adjust the flash compensation value or manual power, and the
up and down buttons to fine-tune. Press the SUB button to confirm
your selection.
5. Repeat steps 2 through 4 for each group.
6. Set the channel by pressing the SUB button again until the channel
number blinks. Use the left and right navigation buttons to cycle
through channel numbers 1–4. When the desired channel number
appears on the LCD, press the MODE button to select it.
3B
Zoom
Using Your VX-760N as a Wireless Master or Slave
3C
Zoom
6
Zoom
| |
39 39