Bolt VX-760N User Manual page 38

Groups: With the VX-760N's wireless system, you can assign slave flash units to any one of three groups (A, B,
or C) and set the mode and power for each group.
Channels: Master and slave flash units exchange data through channels. On the VX-760N, four channels (1, 2,
3, and 4) are available. You can use this option to prevent your slave units from being triggered by the master
unit of another photographer working with the same type of system nearby.
Setting the master mode: To set the VX-760N flash unit to function as a TTL or manual master, follow these
steps:
1. Press the MODE button repeatedly to cycle through the flash modes
until the wireless flash mode
icon ( ) and the group and channel settings appear on the LCD.
2. Set the flash mode for each group by pressing the SUB button until
the desired group (A, B, C) blinks.
3. Press the MODE button repeatedly to cycle through the flash modes (TTL, manual, and flash disabled)
until the desired mode appears on the LCD.
| |
38 38 Using Your VX-760N as a Wireless Master or Slave
1
Zoom