III. Removal and Installation of Battery Harness
Part number: S12-3703010AC
(I). Preparations
Tools: 10#. 13# wrench
(II). Notes
Make sure to disconnect the power supply when disassembling the
electrical components and harnesses.
Ignition switch must be OFF.
(III). Removal Steps
1. Removal
1.1. Use a 10# wrench to remove the battery positive.
1.2. Use a 10# wrench to loosen off the battery negative.
1.3. Use a 13# wrench to loosen off the battery negative harness
Remove the battery negative harness at the vehicle body ground
wire.
2. Installation
The installation steps are reverse to those for removal.
110