Chapter VI Removal and Installtion of Vehicle Ceiling
1. Preparations
Tools: sleeve wrench, cross head screwdriver, flat head screwdriver
2. Notes
2.1. During the removal and installtion, make sure to apply proper
force and no violent operation is allowed.
2.2. During removal and installation of the inner decoration parts,
make sure to protect the decoration parts from being scratched.
3. Removal and Installation of Sun Visor
3.1. Removal Steps
3.1.1. Use a cross head screwdriver to loosen off the screws in the
sun visor on the left of the driver's cab, and disassemble the sun
visor.
As shown in the figure:
Torque: 3±1Nm
3.1.2. The removal steps for the right sun visor are reverse to those
for removal of the left one.
3.2. Installation Steps
The installation steps are reverse to those for removal.