Canon PI}{MA Pro 9000 Serie? Quick Start Manual page 78

Troubleshooting
Number of
I
Possible Cause
I
Try This
Flashes
Eight flashes Ink absorber almost The printer has a built-in ink absorber for the ink used during print head cleaning,
full for example.
Eight flashes indicates that the ink absorber is nearly full.
Press the RESUME/CANCEL button to cancel the error so you can continue printing.
Before the ink absorber becomes completely full, contact the Customer Care
Center. (You will need to replace a particular part of the printer.)
~Important Canon recommends that you call for service as soon as this error
occurs. Once the ink absorber becomes completely full, printing
cannot be performed until the ink absorber is replaced.
Nine flashes A spec,ified period Disconnect the camera cable and reconnect it.
of time has elapsed
WNote
Depending on the model or brand of your PictBridge compliant
without receiving a
response from the
device, you may have to select a print mode before connecting the
digital camera/The
device.
digital camera or
You may also have to turn on the device or select Play mode manually
digital video
after connecting the device to the printer.
camcorder
Perform necessary operations according to the instruction manual
connected is not
supplied with your device.
compatible with
If the error is still unresolved, there is a possibility that you are using a digital
this printer
camera or digital video camcorder that is not supported by this printer. PictBridge-
compatible digital camera or digital video camcorder can be connected to your
printer for Direct Printing.
Ten flashes The Front Tray is not When printing from the Auto Sheet Feeder, return the Front Tray to its normal
set to its correct printing position. Ensure that paper is loaded in the Auto Sheet Feeder and then
position/The Front press the RESUME/CANCEL button on the printer to resume printing.
Tray was moved
Refer to "Returning the Front Tray to Its Normal Printing Position" on page 14 for
during printing
details about how to return the Front Tray to its normal printing position.
If you have moved the Front Tray during printing, return the Front Tray to the
correct position, then press the RESUME/CANCEL button on the printer and try
printing again.
Do not move the Front Tray during printing.
74