Table of Contents
Advertisement
Printing Maintenance
3
Start Print Head Cleaning.
1~~~~~~~~~~~~~~~~~(1)
Clickthe
~aintenance
tab.
--~~~~~~~~~~~~~~(2)
Click Cleaning.
t - - - - - + - -
(3) Select the ink group to clean.
WNote
Clicking Initial Check Items displays
the items to be checked before
cleaning.
~lI"Iee!--+-~~~"'H--
(4)
Click Execute.
Cleaning consumes ink.
Cleans clogged print head nozzles.
Select the target ink group for cleaning.
If
you are not sure of the ink group
for cleaning, execute Nozzle Check.
Ink Group:
t.~ ~"!C~·~·f~·i.~
Groupl BK, R, G, PC, PM
Group.f C, M, Y
Print Hea<;i Cleaning starts when the POWER lamp starts blinking green.
~Important
Do not perform any other operations until the Print Head Cleaning
finishes. This takes about 90 seconds.
(5)
Read the message and click Print Check Pattern to print the nozzle check pattern.
The nozzle check pattern is printed.
~Important
Do not perform any other operations until the nozzle check pattern
printing finishes.
W
Note
The nozzle check pattern will not be printed correctly if there is not
enough ink. Replace the
in'k
tank if the remaining amount of ink is
ins
uffi cient.
See "Replacing an Ink Tank" on page 36.
52
Advertisement
Table of Contents
Troubleshooting
