Cannot Print Properly From The Digital Camera - Canon PI}{MA Pro 9000 Serie? Quick Start Manual

Troubleshooting
"Error No.: 2001"
"Error No.: 2500"
A specified period
of time has elapsed
without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
Automatic Print
Head alignment
failed
W
Note Depending on the model or brand of your PictBridge compliant
device, you may have to select a print mode before connecting the
device.
You may also have to turn on the device or select Play mode
manually after connecting the device to the printer.
Perform necessary operations accordingto the instruction manual
supplied with your device.
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer.
PictBridge-compatible digital camera or digital video camcorder can be
connected to your printer for Direct Printing.
See "Eleven flashes" in "Handling Error Messages" on page 73.
Cannot Print Properly from the Digital Camera
The following are the possible errors that may occur when printing directly from a digital still
camera or digital video camcorder*, and the countermeasures to eliminate them.
*Hereafter, the digital still camera and digital video camcorder are collectively called a digital camera or camera.
Camera Error Message
I
Possible Cause
I
Try This
Printer in use Images are being printed from
Wait until printing ends. The printer automatically starts
the computer printing the images from the camera after completing the
current printing.
The printer is warming up Wait until warm-up ends. When it is ready, the printer starts
printing automatically.
No paper No paper in the Auto Sheet Load the paper in the Auto Sheet Feeder, and select Continue*1
Feeder in the display on your camera.
Paper Error
The printer is not ready to Load the paper correctly in the Front Tray according to the
feed paper from the Front Tray
procedure described in "Loading Paper in the Front Tray" on
yet (the ALARM lamp on the
page
10
and press the RESUME/CANCEL button on the printer.
printer is lit orange.)
The Front Tray or the Rear If the Front Tray is closed, open it to resume printing.
Support is closed (Printer
If the Rear Support is closed when printing from the Front Tray,
ALARM lamp flashes orange
open it and select Continue*l in the display on your camera.
three times.)
The Inner Cover is open
Close the Inner Cover and select Stop in the display on your
(Printer ALARM lamp flashes camera to stop printing.
orange six times.)
The Front Tray is not set to its When printing from the Auto Sheet Feeder, return the Front Tray
correct position or the Front to its normal printing position. Ensure that paper is loaded in
Tray was moved during the Auto Sheet Feeder and then select Continue*1 in the display
printing (Printer ALARM lamp
on your camera to resume printing.
flashes orange ten times.)
Refer to "Returning the Front Tray to Its Normal Printing
Position" on page 14 for details about how to return the Front
Tray to its normal printing position.
If you have moved the Front Tray during printing, select Stop in
the display on your camera to stop printing.
Return the Front Tray to the correct position, and try printing
again.
Do not move the Front Tray during printing.
80