Table of Contents
Advertisement
6
Once connected, an IP address is obtained
automatically.
•
If no IP address is obtained, select
[Retry] and press OK to try to obtain
the IP address again.
7
Select [Finish] in the menu, then press OK to
exit.
Note
•
This product does not support automatic detection of an
Ethernet crossover cable.
•
Loading BD-Live content from the internet may take
some time, depending on the file size and the speed of
the internet connection.
Use Philips EasyLink
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
•
To enable the EasyLink feature, you must turn on the
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
One-touch play
1
Press the STANDBY
product.
»
The TV (if the TV supports one-touch play)
automatically turns on and switches to the
correct video-in channel.
»
If a disc is loaded in this product, disc play
automatically starts.
One-touch standby
1
Press and hold the STANDBY
remote control for more than 3 seconds.
»
All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
Note
•
Philips does not guarantee 100% interoperability with all
HDMI CEC devices.
12
EN
button to turn on this
button on the
5 Play
Play a disc
Caution
•
Do not place any objects other than discs into the disc
compartment.
•
Do not touch the disc optical lens inside the disc
compartment.
1
Press
to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press
to close the disc compartment and
start disc play.
•
To view disc play, turn on the TV to the
correct viewing channel for this product.
•
To stop disc play, press
Note
•
Check the types of discs supported (see "Specifications"
> "Play media").
•
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preference Setup" >
[Parental Control]).
•
If you pause or stop a disc, the screen saver appears after
10 minutes of inactivity. To deactivate the screen saver,
press any button.
•
After you pause or stop a disc and no button is pressed
within 30 minutes, this product automatically switches
to standby.
Disc content structure
The structure of a disc content is generally divided
as shown below.
BD-video, DVD-video
title 1
chapter 1
chapter 2
Audio CD
track 1
track 2
MP3, Windows Media™ Audio, JPEG
folder (group) 1
file 1
file 2
•
[title/chapter] (title/chapter) refers to the
contents on a BD/DVD.
•
[track] (track) refers to the contents on an
audio CD.
•
[folder/file] (folder/file) refers to the contents
on a disc in MP3/WMA/JPEG format.
.
title 2
chapter 1
chapter 2
chapter 3
track 3
track 4
2
folder (group)
file 1
file 2
track 5
file 3
Advertisement
Table of Contents
