One-touch standby
1
Press and hold
(standby) for more than
3 seconds.
»
All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
Note
•
Philips does not guarantee interoperability with other
HDMI CEC devices.
5 Play
Play a disc
Caution
•
Do not insert any objects other than discs into the disc slot.
1
Insert a disc into the disc slot with its label
facing up.
2
Start disc play.
•
To stop disc play, press
•
To eject the disc, press
panel, or press and hold
control to eject the disc.
Note
•
Check disc/file formats supported (see "Your Blu-ray disc
player" > "Playable media").
•
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preference Setup" >
[Parental Control]).
•
If you pause or stop a disc, the screen saver appears after
10 minutes of inactivity. To deactivate the screen saver,
press any button.
•
After you pause or stop a disc and no button is pressed
within 30 minutes, this player automatically switches to
standby.
Play from a USB device
Play or view media files on the following USB devices:
•
flash drive
•
memory card reader
•
HDD (This player can detect only a portable
hard disc drive with USB power peak current
no more than 500mA.)
.
on the front
on the remote
EN
13