Pasting A Variable Name To An Application - Texas Instruments TI-89 Titanium Short User Manual

Pasting a Variable Name to an Application

Suppose you are typing an expression on the Home screen and can't
remember which variable to use. You can display the
select a variable from the list, and paste that variable name directly onto
the Home screen's entry line.
Which Applications Can You Use?
From the following applications, you can paste a variable name to the
current cursor location.
• Home screen, Y= Editor, Table Editor, or Data/Matrix Editor — The
cursor must be on the entry line.
• Text Editor, Window Editor, Numeric Solver, or Program Editor — The
cursor can be anywhere on the screen.
You can also paste a variable name to the current cursor location in many
Flash applications.
Procedure
Starting from an application listed above:
1. Position the cursor where you want to insert
the variable name.
Press 2 °.
2.
3. Highlight the applicable variable.
Note: You can also highlight and paste
folder names.
Press ¸ to paste the variable name.
4.
Note: This pastes the variable's name, not
its contents. Use 2 £, instead of
2 °, to recall a variable's contents.
5. Finish typing the expression.
If you paste a variable name that is not in the current folder, the
variable's pathname is pasted.
sin(class\a2
142
Assuming that
CLASS
if you highlight the a2 variable in
is not the current folder, this is pasted
CLASS
Memory and Variable Management
screen,
VAR-LINK
sin(|
sin(a1|
sin(a1)|
.