Technical Data; Specifications - Bosch DLE 40 Professional Original Instructions Manual

Hide thumbs Also See for DLE 40 Professional:
Table of Contents

Advertisement

Available languages

Available languages

OBJ_BUCH-724-001.book Page 16 Tuesday, July 29, 2008 1:25 PM
16 | English

Technical Data

Digital Laser Rangefinder
Article number
Measuring range
Measuring accuracy (typically)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 40 m distance
Batteries
Rechargeable batteries
Battery live, approximately
– Individual measurements
– Continuous measurement
Automatic switch-off after approx.
– Laser
– Measuring tool (without measurement)
Weight according to EPTA-Procedure 01/2003
Dimensions
Degree of protection
(excluding battery compartment)
A) The working range increases depending on how well the laser light is reflected from the surface of the target (scat-
tered, not reflective) and with increased brightness of the laser point to the ambient light intensity (interior spaces,
twilight). In unfavourable conditions (e.g. when measuring outdoors at intense sunlight), it may be necessary to use
the target plate.
B) In unfavourable conditions (e.g. at intense sunlight or an insufficiently reflecting surface), the maximum deviation
±
is
10 mm per 40 m. In favourable conditions, a deviation influence of
C) In the continuous measurement function, the maximum operating temperature is +40 °C.
D) Fewer measurements are possible when using 1.2 V rechargeable batteries as compared with 1.5 V batteries.
Please observe the article number on the type plate of your measuring tool. The trade names of the individual meas-
uring tools may vary.
The measuring tool can be clearly identified with the serial number 17 on the type plate.
2 609 140 582 | (29.7.08)
3 601 K16 300
– 10 °C...+50 °C
– 20 °C...+70 °C
635 nm, <1 mW
4 x 1.5 V LR03 (AAA)
4 x 1.2 V KR03 (AAA)
58 x 100 x 32 mm
IP 54 (dust and splash water protected)
±
0.05 mm/m must be taken into account.
Bosch Power Tools
DLE 40
Professional
A)
0.05 – 40 m
B)
± 1.5 mm
1 mm
C)
90 %
2
6 mm
24 mm
D)
30000
D)
5 h
20 s
5 min
0.18 kg

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents