Loading Discs - Toshiba TECRA S5 User Manual

Loading discs

To load CD/DVDs, follow the steps below.
1. When the computer's power is on, press the eject button to open
2. Grasp the disc tray gently and pull until it is fully opened.
3. Lay the CD/DVD, label side up, in the disc tray.
When the disc tray is fully opened, the edge of the computer will extend
slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD
at an angle when you place it in the disc tray. After seating the CD/DVD,
however, make sure it lies flat.
Downloaded from LpManual.com Manuals
User's Manual
the disc tray slightly.
Figure 4-4 Pressing the eject button and pulling the disc tray open
Figure 4-5 Inserting a CD/DVD
Operating Basics
Disc tray
Laser lens
4-11