Toshiba MMU-AP0074YH-E Service Manual page 37

NO. Item
Power saving 1. Push the
mode
2. The "
3. The requirement capacity ratio is limited to approximately 75 %.
19
4. If the power saving operation is enabled, the settings are retained when the
operation is stopped, when the mode is changed, or when the power is reset. The
power saving operation will be enabled the next time the operation starts.
Specification outline
button on the remote controller
" segment lights up on the wired remote controller display.
36
Remarks
The power saving
operation cannot be
set by the wireless
remote controller or
wired remote
controller of AMT31E
or older.