No.
Part name
2
Electric parts
1. Detachment
cover
1) Perform work of procedure 1. of 1.
2) Loosen fixing screws. (Ø4 ×8, 2 pcs)
3) Pull down the cover and shift it to the fan motor side to
remove it.
2. Attachment
1) Insert the cover along edge of the electrical control box and
match the projection inside of the fixing screw with hole of
the cover.
2) Tighten the fixing screws. (Ø4 × 8, 2 pcs)
3
Adjust cap
1. Detachment
1) Perform work of procedure 1. of 1.
2) Take off fixing screws. (Ø4 × 12, 2 pcs)
3) Hold handle of the cap, and then slide it toward suction side
to remove cap.
2. Attachment
1) Catch on the top claw and slide it toward discharge side for
attachment.
2) Fit the fixing screws. (Ø4 × 12, 2 pcs)
Procedure
106
Remarks
Screws (2 positions)
Projection
Screw
Sliding direction
Handle