Monitor Function Of Remote Controller Switch - Toshiba MMY-MAP0804HT8JP Service Manual

7-7-11. Monitor Function of Remote Controller Switch

When using a remote controller with the model name RBC-AMT32E, the following
monitor functions can be used.
Calling of display screen
<Content>
The sensor temperature or operation status of the remote controller, indoor unit, or the outdoor unit can be known
by calling up the service monitor mode from the remote controller.
[Procedure]
1
Push + buttons simultaneously for 4 seconds or more
to call up the service monitor mode.
The service monitor goes on, and temperature of the CODE No. 00
is firstly displayed.
2
Push the temperature setup
CODE No. to be monitored.
For displayed codes, refer to the table next page.
3
Push button to determine the item to be monitored.
Then monitor the sensor temperature or operation status of indoor
unit and the outdoor unit in the corresponding refrigerant line.
4
Pushing button returns the display to the normal display.
buttons to select the
– 162 –
TEMP.
2
TIMER SET
TIME
FILTER
RESET TEST SET CL SWING/FIX
4 3 1
ON / OFF
FAN MODE
SAVE VENT
UNIT LOUVER