Table of Contents
Advertisement
N
O
.
I
e t
m
Selection of
1. The range of operations that can be performed via an indoor unit remote controller
central control
can be determined through the setting of the central controller.
mode
2. Setting details
TCC-Link central control
Operation
via TCC-
Link central
Individual
Central 1
16
Central 2
Central 3
Central 4
(O: Accessible
Louver control
1. Louver position setting
• When the louver position is changed, the louver turns all the way down before
• Louver position is adjustable in the range shown in the diagrams below.
• During group operation, position setting can be performed individually or
2. Swing setting
• The "SWING" sign is displayed, along with alternating images as shown below.
17
• During group operation, swing setting can be performed individually or
3. Set louver positions
Oil/refrigerant recovery
DC motor
1. When the fan is turned on, the positions of the stator and rotor are determined.
(The motor turns in incremental steps.)
2. The fan operates in accordance with commands issued by the indoor controller.
Note:
If the fan is rotating while the air conditioner is turned off due to an inflow of outside
18
air or some other reason, the indoor unit may operate without turning on the fan
motor.
Note:
If fan motor lock is detected, the indoor unit is turned off, with an error display
provided.
S
p
Operation via RBC-AMT32E
Operation
Start/stop
mode
selection
control
selection
O
O
O
O
O
: Inaccessible)
settling in the set position.
During cooling/drying
collectively.
In all operation modes
collectively.
4-way
Normal stop
Downward
Abnormal stop
Downward
Heating standby
Upward
Upward
e
c
f i
c i
t a
o i
n
o
u
l t
n i
e
Timer
Temperature
Fan speed
setting
setting
setting
O
O
O
O
O
O
O
O
O
O
O
During heating/fan-only operation
(alternating)
1-way (SH)
2-way
Closed
Upward
No change
Upward
Upward
Upward
Upward
No change
– 73 –
• In the case of a wired
remote controller,
"CENTRAL
CONTROL IN
PROGRESS
displayed (lit up) while
in central control
RBC-
Air flow
AMT32E
mode.
direction
display
• The display blinks
setting
when a control
O
function inaccessible
to a remote controller
O
"CENTRAL
is chosen.
CONTROL
O
• A wireless remote
IN
PROGRESS"
controller has the
O
same set of control
O
functions, although
there is no display.
When a control
operation is
performed via a
wireless remote
controller while in
central control mode,
a peep sound alert (5
times) is provided.
Ceiling
Horizontal
Horizontal
Horizontal
Horizontal
Check code "P12"
R
e
m
a
k r
s
" is
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
