Wax; Graphics; Sidewalls - Damon Astoria Pacific Edition Owner's Manual

extreme cases. Small cracks known as gel coat crazing are a common characteristic of
the gel coat finish (not warrantable defects).
Wax fiberglass surfaces at least once a year with a standard liquid or nonabrasive paste
wax. Make sure to follow the directions for use as outlined by the product manufacturer.
Make sure to wash and wax your unit out of the hot sun when the exterior surfaces are
cool.
Clean and wax all trim extrusions when waxing the recreational vehicle sidewalls, to help
avoid surface pitting. Special aluminum cleaners are available to restore the original
luster to aluminum surfaces. Make sure to follow the instructions for use as outlined on
the product package.
Storage of the recreational vehicle out of direct sun is also a primary way to help
preserve fiberglass finishes.
Physical damage to fiberglass should be taken care of immediately to avoid moisture
from entering through breaks or cracks, causing problems with interior walls and
components. Cover breaks in the fiberglass with plastic, sealing the edges with tape
until the proper repairs can be made.
DO:
• Wash your RV with liquid detergents.
• Wax the sidewalls using nonabrasive automotive waxes or cleaner/polishes
developed for use on fiberglass boats, showers, and tubs. Follow the directions on
the package.
DON'T:
• Use abrasive cleaners.
• Use rubbing compounds.
• Dry wipe surface; clean only with water and liquid detergent.
Proper care and maintenance of vinyl graphics or paint is critical in maintaining its
appearance. The following cleaning and maintenance recommendations should be
followed to ensure the maximum appearance and performance of your vehicle's custom
designed finish:
When washing, flush the surface with water to loosen large particles of dirt and grime.
Fill a bucket with warm water (not to exceed 120 degrees F. (120°F)) and use a
mild detergent or a liquid car wash mixture. Follow manufacturer instructions on the
container.
Using a clean soft cloth or sponge and the liquid car wash mixture, wipe the entire
surface, using horizontal motions until it is clean. Rinse off the detergent with clean
water starting from the top and rinse downward until it is clean.
Chapter 10 - Care and Maintenance

WAX

GRAPHICS

SIDEWALLS