Extending The Slideroom; Retracting The Slideroom - Damon Astoria Pacific Edition Owner's Manual

1. Before operating the system, verify your coach batteries are fully charged.
2. Before extending slide room, verify the following:
• Turn chassis ignition off. This system will not function with your key on. Level your
motorhome by utilizing the hydraulic leveling jacks.
• Before extending the slide room, remove the travel locks from the slide room by
rotating and removing, and move the driver's seat to the furthest forward position,
and place the seat back in the vertical position.
• Verify that there are no objects (trees, electrical box, people, etc.) in the way of the
slide room before extending it.
3. After the above steps have been verified, locate the switch for the slide room in the
hallway, or bedroom of the motorhome. Turn the key to the ON position. As you
press the switch to the OUT position, the room will begin to travel outward. (As a
safety feature, if you let up on the switch, the room will stop moving).
4. As this slide room is designed to roll across the carpet, it may be necessary to
vacuum the floor after each extension of the room.
5. It may be necessary to re-level your motorhome after the room is extended.
1. Before operating the system, verify that your coach batteries are fully charged.
2. Before retracting the room, verify the following:
• The driver's seat in a motorhome is in the most forward position, and the seat back
is in the vertical position.
• No debris is caught between the slide room roof and awning. Verify that any cargo
inside the motorhome during the retraction mode will not restrict the slide room.
3. Turn the key to the ON position. Press the slide room switch to the IN position. (As
a safety feature, if you let up on the switch, the room will stop moving).
4. Turn the key to the OFF position. Insert the travel lock into the wall socket, two if
provided. (The tension on the travel lock may be tightened by rotating the center
portion of the travel lock clockwise, counter clockwise to loosen).
5. Retract leveling jacks before moving the motorhome.
6. Return driver seat to the driver's preferred position.
Your slideout requires very little maintenance. To ensure the long life of the system, read
and follow these few simple procedures:
• When the room is out, visually inspect the inner slide tube assemblies. Check for
excess build up of dirt or other foreign material; remove any debris that may be
present.
Chapter 8 - Interior Systems
EXTENDING SLIDE
ROOM
RETRACTING SLIDE
ROOM