Home Theater Programming - Damon Astoria Pacific Edition Owner's Manual

Chapter 7 - Technical Systems
HOME THEATER
PROGRAMMING
4
PIONEER VSX-D515 PROGRAMMING INSTRUCTIONS-1:
1. Turn the receiver power ON.
2. Press the RECEIVER button on the top left side of the remote.
3. Press the SYSTEM SETUP button located near the center of the remote.
4. Press the RIGHT ARROW button near the center of the remote until the display
reads SP SETUP. Then press ENTER on the remote twice.
5. Press the DOWN ARROW button on the remote until the display reads F LARGE.
Then press ENTER.
6. Press the DOWN ARROW button until the display reads C SMALL. Then press
ENTER.
7. Press the DOWN ARROW button until the display reads S SMALL. Then press
ENTER.
8. Press the DOWN ARROW button until the display reads SB NO. Then press
ENTER.
9. Press the DOWN ARROW button until the display reads SW YES. Then press
ENTER.
10. Press the RETURN button three times. This button is located just above and to the
right of the arrow keys.
11. For more programming information please refer to the product's owners manual in
your motorhome.
PIONEER VSX-D515 PROGRAMMING INSTRUCTIONS-2:
1. Press the DVD/LD button on the receiver.
2. Press the SIGNAL select button on the receiver until the display reads DIGITAL.
3. Push the STANDARD button on the receiver until the display reads DOLBY PL.
4. Press the DVR/VCR button on the receiver.
5. Press the ADVANCED SURROUND button on the receiver until the display reads
5-STEREO.
6. Press the CD-R/TAPE button on the receiver.
7. Press the ADVANCED SURROUND mode button on the receiver until the display
reads 5-STEREO.
8. Press the AM or FM button on the receiver.