Rear View - RCA RLC3257A Instruction Manual

2. Rear View

Coax
AC POWER IN:
POWER ON/OFF and need to enlarge the position of this power switch to alert users to power on
SWITCH:
this switch first prior to operate the product.
COAX : Digital audio output.
RF : Connect antenna or cable 75 Ohm coaxial to receive TV signal.
: Connect it to the HDMI output of video device.
HDMI1/2/3
USB(Service)
YPbPr : Connect them to the video output terminal of DVD.
L/R : Connect them to the audio output terminal of DVD
VIDEO : Connect it to video output of video device.
L/R in : Connect them to audio output of video device.
AUDIO L/R out : Connect them to audio equipments.
Headphone out
After you connect the power cord into the power socket, make sure the power cord is
fully inserted into the unit. Then press the power ON/OFF switch to "ON" position as
shown left.
RF VGA PC-IN
Connect it to AC100-240V~ 50/60Hz power supply with the mains cable.
: For service use only.
: Connect it to your headphone or audio equipments.
Introduction
HDMI1 HDMI2 HDMI3 (Service)
(Shared with YPbPr)
6
Y Pb Pr
Video R in L in
USB
SWITCH
R L
R L
AUDIO OUT
ON