Before You Begin
Front Panel
The front panel controls provide functional navigation if the remote control is lost or is temporarily out of service. Certain functions,
such as those requiring a numeric entry, require a remote control. Some connectors are not enabled and require the support of
application software.
1
2
3
4
Rear Panel
The rear panel contains a 3-prong power outlet; connectors for video, audio, and RF cabling; data output; and data interface connectors.
Some connectors are not enabled and require the support of application software.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*Feature is dependent upon application setting and availability in content
QIP7100 Quick Start Guide
1
2
OK
USB connector
Cursor — 4-way menu navigation
•
— Startup Indicator
Power — Turns the set-top on and off (standby)
FiOS TV In — Connects to FiOS signal from your service provider
IR Remote Input — Connects to a remote control set-top accessory cable
Reserved – Service only
IEEE-1394 — Audio and video device connection
RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR
YPbPr — Component video output (HDTV)
Audio — Composite Audio L/R outputs
Video — Composite Video (SDTV) output
Digital Audio (Coaxial)* — Provides Dolby® Digital 5.1 audio or PCM output
Optical Audio (S/PDIF)* — Provides Dolby® Digital 5.1 audio or PCM output
S-Video — Connects to S-Video (SDTV) input of TV or VCR
HDMI — High-Definition TV (HDTV) connector
Ethernet* — Network connection
USB* 2.0 — High-Speed peripheral device connection
Power cord connector — 3-prong AC outlet
4
3
POWER
QIP7100 2
2