Before You Begin
Introduction
Congratulations on receiving a Motorola QIP7100 Hybrid QAM/IP High-definition Set-top. This document will help you set up your
Hybrid QAM/IP HD Set-top to quickly get it up and running.
READ THIS FIRST
1. Determine if you are connecting to a:
High-Definition
Use the HDMI, component video (YPbPr), or IEEE-1394 outputs. No other video connection supports HDTV.
TV or monitor
If the TV has no HDMI input but does have a DVI input, connect a DVI-to-HDMI adapter or cable to the HDMI
out connector on the QIP set-top instead of the IEEE-1394 connection, and the DVI-HDTV connector on your
TV.
Standard-
Connect the S-Video connector using an S-video cable, or connect the composite video connector using a
Definition TV
composite (RCA phono) cable. If the TV only has a coaxial RF input, connect it to the QIP7000 series RF OUT
connector.
2. Determine if you are connecting the audio to a home theater receiver or directly to the TV:
•
For an HDMI or IEEE-1394 video connection, no additional audio connections are required.
•
For a DVI video connection, additional audio connections are required.
•
If the receiver or TV has a digital audio (S/PDIF) input, use the Optical Audio (S/PDIF) or Digital Audio (COAXIAL) outputs.
•
Otherwise, use the baseband left and right audio outputs.
3. Locate the cabling diagram(s) that best match the configuration.
4. Connect the audio and video cables in a manner matching that diagram.
5. Determine if you are connecting to a data device. For installation details, refer to the instructions included with the data device.
6. Connect the Fios TV In terminal to the coaxial cable wall outlet.
7 . Perform the operational check for the remote control.
8. Optimize the high-definition settings.
QIP7100 Quick Start Guide
1