Range Hood Use; Operation; Range Hood Care; Cleaning And Maintenance - Whirlpool GZ5730XR Series Installation Instructions And Use And Care Manual

RANGE HOOD USE

Operation

Hood control panel
A
LOW
FAN
A. Fan switch
B. Light switch
Operating the fan
A 3-position rocker switch controls the fan. The left position is low
speed, center position is off, and the right position is high speed.
An indicator light shows that the fan is on.
Operating the light
A 3-position rocker switch controls the lights. The left position is
low light intensity, center position is off, and the right position is
high light intensity.
Replacing the light bulbs
Before you begin, make sure that the range hood is turned off
and that the lamps have had sufficient time to cool. Halogen
bulbs burn extremely hot. See bulb packaging for further
information.
Replace with (2) PAR20, 50W maximum halogen bulbs or
(2) R16, 40W maximum incandescent bulbs.
10
B
HIGH LOW HIGH
LIGHT

RANGE HOOD CARE

Cleaning and Maintenance

Be sure lights are cool before cleaning the hood.
To clean hood
1. Disconnect power.
2. Remove filters.
3. Use a damp cloth and a mild detergent to wipe all grease-
laden surfaces. Use care when cleaning fan blade - it must
not become bent or misaligned. Do not allow water to enter
the motor.
4. Make sure all surfaces are completely dry before replacing
filters.
5. Reconnect power.
Motor is permanently lubricated. Do not oil or disassemble motor.
Aluminum mesh filters
Clean often using hot water and a mild detergent. Filters are
dishwasher safe.
Charcoal filters (non-vented installations)
Clean filter surfaces frequently with a damp cloth and mild
detergent. Do not immerse filters in water or put in
dishwasher.
Special blue and yellow strips will blend to green when it is
time to change the filter. These strips work best when facing
toward the cooking surface.
30" (76.2 cm) Filter Kit No. 4396291 or 36" (91.4 cm) Filter Kit
No. 4396292 is available from your dealer.