Advertisement
Correct use of adapters and MicroDot connectors
To provide users with safe and compact mounting of connec-
tors, all our d:screet Miniature Microphones are fitted with the
MicroDot connector. A broad range of adapters is offered as
optional accessories for most wireless systems for professional
use. A connector-tightening tool is supplied with each adapter
and should be employed whenever the MicroDot connector
needs to be tightened safely onto the adapter. Never attempt
to loosen or tighten the connector by the cable or its strain
relief. Some wireless systems require the use of electronic
components inside the adapter to optimize the signal level, the
DC-offset filtering, and powering of the built-in microphone
preamplifier. Always use the adapters from DPA Microphones
with the wireless systems to ensure the correct electronic cir-
cuit. Do not use non-standard adapters or connectors as you
might damage the microphone preamplifier.
Specifications for d:screet™ Necklace Microphone
On-axis Frequency Response
High boost grid.
Directional characteristics:
Omnidirectional
Principle of operation:
Pressure
Cartridge type:
Pre-polarized condenser element with vertical diaphragm
Frequency range, +/- 2 dB:
High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz.
Polar Pattern
Directional characteristics
(normalized)
5
8 kHz
20 kHz
16 kHz
4 kHz
80 Hz
125 Hz
250 Hz
500 Hz
1 kHz
2 kHz
Advertisement
