Related Manuals for DPA d:screet SC4098
Summary of Contents for DPA d:screet SC4098
- Page 1 Supercardioid Tabletop and Ceiling Microphone Solutions Microphone Base User’ s Manual d pa m i cro ph on e s. c o m / m i c -b as e...
- Page 2 A d:screet™ SC4098 Supercardioid Podium Microphone mounted in a DM6000 Microphone Base fits equally well on a table, lectern or hung from the ceiling. This microphone solution delivers clean intelligible pick-up of speech / vocals and rejects background noise with its supercardioid directionality. Low noise and a design with internal shockmount that highly dampens unwanted sounds from tables and lecterns, secure a trouble-free installation.
- Page 3 MicroDot This unbalanced version allows the use of an external adapter to XLR (DAD6001) or a wireless transmitter via the wide range of DPA adapters. Unterminated Balanced output with free leads for easy adaption to Phoenix connectors widely used in the installation processors or input nodes.
-
Page 4: Installation
Available in black and white with gooseneck lengths of 16 cm (6 in), 28 cm (11 in), 43 cm (17 in); it is possible to accommodate any need for sleek Scandinavian design and superior audio quality. A locking ring secures the gooseneck to the base mount for protection and hidden mounting holes in the base make it possible to attach the microphone to either a table, lectern or ceiling. - Page 5 Fig. 1 Fig. 2...
- Page 6 Remount the cover, attach the gooseneck microphone and screw it onto the Microphone Base (Fig. 3). Then slide down the locking ring and screw it on. (Fig. 4). Fig. 3 2. Connect MicroDot...
- Page 7 Fig. 4 Lock...
- Page 8 Specifications Directional pattern Supercardioid Principle of operation Pressure gradient Cartridge type Pre-polarized condenser Frequency range 20 Hz - 20 kHz Frequency range, ±2 dB, 20 cm (7.9 in) 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz Sensitivity, nominal, ±3 dB at 1 kHz 16 mV/Pa;...
- Page 9 Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz on XLR / Unterminated leads or DAD6001 XLR Adapter Power supply (for full performance) From MicroDot: 5 V From DAD6001 XLR Adapter: 48 V ±4 V (will work from 12V) From XLR connector or Unterminated leads: 48 V ±4 V (will work from 12 V) Current consumption...
- Page 10 0 º 250 Hz 5 dB 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 16 kHz Typical directional characteristics of a d:screet™ SC4098 Supercardioid Podium Microphone ° ° ° ° ° 20 Hz 1 kHz Typical on- and off-axis response of a d:screet™ SC4098 Supercardioid Podium Microphone measured at 20 cm (8 in)
-
Page 11: Coverage Area
Coverage area... - Page 12 Fig. 5 Ø 110 mm (4.33 in) Cable outlet 50 mm (1.96 in) 78 mm (3.07 in)
- Page 13 Ø 15 mm (0.59 in) Fig. 6 160 mm 2 6.29 in 0.07 280 mm 5 11.02 in 0.19 430 mm 5 16.92 in 0.19 d:screet™ SC4098 Supercardioid Podium Microphones...
-
Page 14: Optional Accessories
Fig. 7 Optional accessories DUA0580W & DUA0580B Foam Windscreens Adapters for wireless applications dpamicrophones.com/adapters DAD6001-BC MicroDot to 3 pin XLR adapter dpamicrophones.com/adapters... - Page 15 To use your previously-purchased d:screet™ SC4098 with the Microphone Base you will need to carefully remove the rubber covering the gooseneck tube so that you can fit and lock the gooseneck into the Microphone Base. REMOVE THIS CAREFULLY...
- Page 16 L e a r n m o re a b o u t D PA p ro d u c t s o n d p a m i c ro p h o n e s . c o m Service &...