Taillamps, Turn Signal, Stoplamps; And Back-Up Lamps - Chevrolet 2007 Colorado Owner's Manual

5. Insert the bulb socket into the lamp assembly
and turn it clockwise to secure.
6. Reinstall the lamp assembly and tighten
the screws.

Taillamps, Turn Signal, Stoplamps

and Back-up Lamps

To replace one of these bulbs:
1. Open the tailgate.
See Tailgate on page 110
for more information.
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back-up Lamp
3. Pull the lamp assembly away from the vehicle.
4. Turn the bulb socket counterclockwise to
remove it from the taillamp assembly.
5. Holding the socket, pull the old bulb to
release it from the socket.
6. Push the new bulb into the socket until it clicks.
7. Insert the bulb socket into the taillamp
assembly and turn it clockwise to secure.
8. Reinstall the taillamp assembly and tighten
the screws.
9. Close the tailgate.
2. Remove the
two rear lamp
assembly
screws near the
tailgate latch.
373