Restraint System Check; Checking The Restraint Systems; Replacing Restraint System Parts; After A Crash - Chevrolet 2007 Colorado Owner's Manual

Restraint System Check

Checking the Restraint Systems

Now and then, make sure the safety belt reminder
light and all your belts, buckles, latch plates,
retractors and anchorages are working properly.
Look for any other loose or damaged safety
belt system parts. If you see anything that might
keep a safety belt system from doing its job, have
it repaired. See Care of Safety Belts on page 425
for more information.
Torn or frayed safety belts may not protect you in
a crash. They can rip apart under impact forces.
If a belt is torn or frayed, get a new one right away.
Also look for any opened or broken airbag
covers, and have them repaired or replaced. The
airbag system does not need regular maintenance.
Notice: If you damage the covering for
the driver's or the right front passenger's
airbag, or the side impact airbag covering
(if equipped) on the ceiling near the side
windows, the airbag may not work properly.
96
You may have to replace the airbag module
in the steering wheel, both the airbag module
and the instrument panel for the right front
passenger's airbag, or side impact airbag
module and ceiling covering for roof-mounted
side impact airbags (if equipped.) Do not
open or break the airbag coverings.

Replacing Restraint System Parts

After a Crash

CAUTION:
{
A crash can damage the restraint systems
in your vehicle. A damaged restraint
system may not properly protect the
person using it, resulting in serious injury
or even death in a crash. To help make
sure your restraint systems are working
properly after a crash, have them inspected
and any necessary replacements made
as soon as possible.