Chevrolet 2007 Colorado Owner's Manual page 67

2.2. Route the top tether (A) through the
loop (B) at the top of the seatback to
attach the top tether to the nearest
top tether anchor (C).
3. Tighten the lower anchor attachments and
the top tether. The child restraint instructions
will show you how.
4. Push and pull the child restraint in different
directions to be sure it is secure.
Front Seat — Regular/Extended Cab
without Rear Seats
Your vehicle has a right front passenger's
airbag and a passenger sensing system.
The passenger sensing system is designed
to turn off the right front passenger's frontal
airbag when an infant in a rear-facing infant
seat or a small child in a forward-facing
child restraint or booster seat is detected.
See Securing a Child Restraint in the Right
Front Seat Position on page 72 and Passenger
Sensing System on page 88 for important
safety information and additional information
on installing a child restraint in the right front
seat position.
1. See Securing a Child Restraint in the Right
Front Seat Position on page 72 for instructions
on installing the child restraint using the
safety belts.
2. If the child restraint manufacturer's instructions
recommends that the top tether be attached,
attach and tighten the top tether to the top
tether anchor. Refer to the child restraint
instructions and the following steps:
2.1. Pull the seatback forward to access
the top tether anchor. See Seatback
Latches on page 16.
2.2. Pull on the finger access tab to remove
the cover to access the top tether
anchor.
67